Hesse Metallic Stain

Fast drying, solvent-based pore stain used for colour-contrasting emphasis of the pores on woods with coarse pores. Available in silver, copper, gold and many bright colour tones.

DOWNLOAD DATA SHEET

Description

For use with subsequent re-coating in industry and handcrafting of doors, home furnishings and kitchen furniture.

  • Wiping stain for achieving special effects
  • for coloured emphasis of the pores
  • available in silver, copper, gold and many bright colour tones

Surface Preparation

The substrate must be dry, dust-free and grease-free.

Finishing

After thorough drying, the stains are coated over using light stable Hesse PU lacquers.

Application

  • Compressed air spraying

Processing instructions

Prepare the substrate in the desired manner with at least 2 coats of CN or PU coloured or multicoat lacquers or basecoats and allow the last coat to dry for a minimum of 16 h. No sanding required.Apply the wiping stain using a spray gun, brush or balled up cloth.Carefully rub down the coating on the wood with steel wool or sanding fleece after the wiping stain has dried, so that the product only remains in the pores. Remove any remaining haze by slight sanding with 400 grit.Then finish with a top coat of a lacquer from the same system.

  • Prepare the substrate in the desired manner with at least 2 coats of CN or PU coloured or multicoat lacquers or basecoats and allow the last coat to dry for a minimum of 16 h.
  • No sanding required.Apply the wiping stain using a spray gun, brush or balled up cloth.Carefully rub down the coating on the wood with steel wool or sanding fleece after the wiping stain has dried, so that the product only remains in the pores.
  • Remove any remaining haze by slight sanding with 400 grit.Then finish with a top coat of a lacquer from the same system.

Particular Instructions

Chemical stains react with the wood contents. Depending on the areas where the woods were grown, when they were cut and the like, their tannin content varies and can lead to different colour developments. Lighten by adding: water. Apply thinned material on the same day. Tinting and mixing with colour concentrates and the like are not permissible. With chemical stains, the use of tools or containers made from corrosive metals is forbidden.

ORDER NUMBER

COLOUR TONE

CONTAINER SIZE

TD 4215-02211

GOLD

1 l, 5 l, 25 l

TD 4215-02212

COPPER

1 l, 5 l, 25 l

TD 4215-02213

SILVER

1 l, 5 l, 25 l

COLOUR TONES

GOLD

COPPER

SILVER

Additional information

Product Type

You may also like…