Cleaning and care product for white or light parquet or wooded floors and furniture surfaces; or directly on raw wood. This achieves a lighter soap effect that is dependent on the species of wood. Not suitable for mirrors, marble or non-slip surfaces.
HESSE WHITE SOAP
Solvent-free and biodegradable Cleaning solution for surface treatment. Can also be used for cleaning and care for light parquet/wooden floors and furniture surfaces. It is water-dilutable, pigmented and extremely low-odour.DOWNLOAD DATA SHEET
- solvent-free and biodegradable surface finish
- also suitable for cleaning and care of light parquet and furniture surfaces.
- water-dilutable and extremely low-odour.
Loose dust and dirt should be swept or vacuumed up. Other contamination should be removed appropriately, without leaving any residues. In the case of direct application on raw wood: raw-wood sanding as per instructions, followed by dust removal. On moisture-sensitive substrates, e.g. beech, wooden paving, etc., soaps are not recommended on account of the high moisture level.
Loose dust and dirt should be swept or vacuumed up. Other contamination should be removed appropriately, without leaving any residues. On moisture-sensitive substrates, e.g. beech, wooden paving, etc., soaps are not recommended on account of the high moisture level. In addition, cleaning and care must only be carried out using a damp, not wet, cloth here.
Cleaning and care product for light, lightly-soaped or oiled surfaces: WHITE SOAP at a ratio of 2 : 100 (100 ml to 5 l water) with water and apply this cleaning solution with a mop evenly, not too wet, thereby removing the dirt from the surface. Then wash out the mop with clean water and damp-wipe the surface again with fresh cleaning solution and leave to dry.
Do not rinse the surfaces with clean water! When using as a “soap”: mix Hesse WHITE SOAP at a ratio of 1 : 5 (1 l to 5 l water) with lukewarm water and wipe the wooden floor with a lightly wrung mop in the direction of the grit. Then leave the surface to dry. If necessary, repeat this process another 1 – 3 times. Do not rinse with clean water!
Test before use on an original surface! Please also note our special care instructions for floor surfaces in accordance with DIN 18356! Only wipe parquet with a soft, damp cloth not a wet cloth. Use only neutral cleaners free from silicone, ammonium chloride and abrasives.
Regular care and cleaning with Hesse PROTECT-CLEANER PR 90 and Hesse INTENSIVE-CLEANER PR 91 increase the lifespan of the coating.